Telekosmos-Praktikum Teil 1 von Heinz Richter

W

Walter Bright

Guest
I had the KOSMOS Electronik-Labor X as a kid, and enjoyed it immensely.

With the kind permission of KOSMOS, the classic
manual for it from 1969 is now online at
www.generalatomic.com/teil1/index.html.

I hope everyone interested in electronics will enjoy it as much as I did.
 
"Joerg" <notthisjoergsch@removethispacbell.net> schrieb im Newsbeitrag
news:juj%e.1611$Y_5.1380@newssvr11.news.prodigy.com...
I just wonder what's out there for today's kids.
Original Protoboards mit Original Bauteilen und Anleitungsbuch.
http://www.b-kainka.de/buch.htm
Genau so macht man das heute.

http://www.b-kainka.de/kosmos/kosmos.htm
http://www.erinacom.de/elektronik/index.htm

Aber, gib zu, verstanden hat man bei den alten Kaesten wenig,
nur nach Anleitung eingesteckt und wenn's nicht ging nach
einigem Rumfummeln in die Ecke gelegt, denn leider waren die
Anleitungsbuecher nicht wirklich verstaendnisfoerdernd.
Ich hab vor 10 Jahren oder so die Philips-Buecher bis hin zum
EE2007 Fernseher noch mal gelesen. Grauenhaft.
Das ist heute leider nicht viel besser.
--
Manfred Winterhoff, reply-to invalid, use mawin at gmx punkt net
homepage: http://www.geocities.com/mwinterhoff/
de.sci.electronics FAQ: http://dse-faq.elektronik-kompendium.de/
Read 'Art of Electronics' Horowitz/Hill before you ask.
Lese 'Hohe Schule der Elektronik 1+2' bevor du fragst.
 
Walter Bright schrieb in Nachricht ...
I had the KOSMOS Electronik-Labor X as a kid, and enjoyed it immensely.

With the kind permission of KOSMOS, the classic
manual for it from 1969 is now online at
www.generalatomic.com/teil1/index.html.

I hope everyone interested in electronics will enjoy it as much as I did.
Das mag ja so sein, daß man Richter nett finden kann, aber was er zum
Stromfluß dagt, ist schlicht falsch: "Dieses Wandern wird so lange in
unveränderter Stärke fortbestehen, bis ein vollständiger Ausgleich zustande
gekommen ist." Zwar fließt ein elektrischer Strom aufgrund einer
Potentialdifferenz, aber nicht in unverminderter Stärke. Wir haben es
vielmehr mit einer sinkenden Stromstärke aufgrund des Umstandes zu tun, daß
mit fortschreitender Entladung ja auch die Spannung sinkt. Den genauen
Verlauf kann man mit einer e-Funktion nachrechnen.

Heinz Richter ist Nostalgie. Rückopplungsempfänger baut heute keiner mehr,
schon gar nicht mit Röhren.

Holger
 
Hello Walter,

I had the KOSMOS Electronik-Labor X as a kid, and enjoyed it immensely.

With the kind permission of KOSMOS, the classic
manual for it from 1969 is now online at
www.generalatomic.com/teil1/index.html.

I hope everyone interested in electronics will enjoy it as much as I did.
Ah, the good old days. When I was 7 or 8 I had a Philips lab kit. EE75
or something like that in a blue/white box. The nice thing was that it
consisted of real parts. And yes, that occasionally meant breaking off a
lead of the precious AF116 and having to crack the piggy bank. Four
Deutschmarks. Ouch. On the other hand one could add stuff from the
regular electronics stores and try a totally different design.

Mounting was by means of spring contacts that you could insert into peg
board. The springs were kind of strong so once the bleeding from various
fingers had stopped you could then proceed to build a circuit from the
booklet or later try out your own ideas. Marvelous. That's how I got
into electronics.

I just wonder what's out there for today's kids. Anything? My impression
is that there can't be much, considering that many newly minted
engineers can't even solder (!).

Since it seems you grew up in Europe, do you remember all those little
Franzis paperback booklets?

Regards, Joerg

http://www.analogconsultants.com
 
With the kind permission of KOSMOS, the classic
manual for it from 1969 is now online at
www.generalatomic.com/teil1/index.html.

I hope everyone interested in electronics will enjoy it as much as I
did.

Ah, the good old days. When I was 7 or 8 I had a Philips lab kit. EE75
or something like that in a blue/white box. The nice thing was that it
consisted of real parts. And yes, that occasionally meant breaking off a
lead of the precious AF116 and having to crack the piggy bank. Four
Deutschmarks. Ouch. On the other hand one could add stuff from the
regular electronics stores and try a totally different design.

Mounting was by means of spring contacts that you could insert into peg
board. The springs were kind of strong so once the bleeding from various
fingers had stopped you could then proceed to build a circuit from the
booklet or later try out your own ideas. Marvelous. That's how I got
into electronics.

I just wonder what's out there for today's kids. Anything? My impression
is that there can't be much, considering that many newly minted
engineers can't even solder (!).
Hello Joerg,

i also got a KOSMOS Elektronikbaukasten from the Weihnachtsman in 1974, when
i was 12. Was very happy about, and learned a lot about electronics.

Today there is a cheaper way at ALDI äh - no, LIDL:
http://www.lidl.de/de/home.nsf/pages/c.o.20051004.p.Elektronik-Bausatz.ar9

Don't know anything about the quality, but it costs only 9euro99.
Avarice is horny (german lifestyle).
Prost Mahlzeit.

MIKE
 
"Joerg" <notthisjoergsch@removethispacbell.net> schrieb im Newsbeitrag
news:p3k%e.1619$Y_5.864@newssvr11.news.prodigy.com...
Hello Mike,

Today there is a cheaper way at ALDI äh - no, LIDL:

http://www.lidl.de/de/home.nsf/pages/c.o.20051004.p.Elektronik-Bausatz.ar9

Doesn't work. They want a zip code so I keyed one in that I remembered
from Germany. It's not a good web site to find anything on. Tell them to
hire someone who knows web design.
Enter 82008 or 82024 as a PLZ and search for a electronic kit.

MIKE

PS: JAJA deutsche NG.
 
Hallo Manfred,

http://www.b-kainka.de/kosmos/kosmos.htm
http://www.erinacom.de/elektronik/index.htm
Schoen! Auch wenn ich diese weissen Steckbrettchen nicht mag, wenigstens
gibt es Experimentiersets dann offenbar doch noch.

Aber, gib zu, verstanden hat man bei den alten Kaesten wenig,
nur nach Anleitung eingesteckt und wenn's nicht ging nach
einigem Rumfummeln in die Ecke gelegt, denn leider waren die
Anleitungsbuecher nicht wirklich verstaendnisfoerdernd.
Ok, ich gebe es zu. Die erste Anleitung hatte ich nicht gerafft. Aber
ich musste ja unbedingt als allererstes das schwierigste Experiment
bauen, eine kleine Orgel. Es half, dass mein Vater auch Ingenieur ist.

Danach lief es aber. So nach und nach verstand ich, wie und warum die
Schaltungen funktionerten. Dann kam das beruechtigte Abschweifen vom
Buch. Mit dem AF116 liessen sich nicht nur Empfaenger bauen ...

Ich hab vor 10 Jahren oder so die Philips-Buecher bis hin zum
EE2007 Fernseher noch mal gelesen. Grauenhaft.
Das ist heute leider nicht viel besser.
Doch heute gibt es Art of Electronics. Und der Tietze Schenk ist, glaube
ich, inzwischen sogar in portugiesisch zu bekommen.

Gruesse, Joerg

http://www.analogconsultants.com
 
Hello Mike,

Today there is a cheaper way at ALDI äh - no, LIDL:
http://www.lidl.de/de/home.nsf/pages/c.o.20051004.p.Elektronik-Bausatz.ar9
Doesn't work. They want a zip code so I keyed one in that I remembered
from Germany. It's not a good web site to find anything on. Tell them to
hire someone who knows web design.

Don't know anything about the quality, but it costs only 9euro99.
Avarice is horny (german lifestyle).
But Avarice ain't your girlfriend, is it? SCNR :-D

Prost Mahlzeit.
Skol!

Regards, Joerg

http://www.analogconsultants.com
 
Hello Mike,

http://www.lidl.de/de/home.nsf/pages/c.o.20051004.p.Elektronik-Bausatz.ar9

Doesn't work. They want a zip code so I keyed one in that I remembered
from Germany. It's not a good web site to find anything on. Tell them to
hire someone who knows web design.

Enter 82008 or 82024 as a PLZ and search for a electronic kit.
Ah, now it worked. Nice. I think that is a good deal for 10 Euros.
Walter, what do you think?

PS: JAJA deutsche NG.
Bei Euch versteht aber doch jeder Ingenieur Englisch. Ich weiss nicht,
ob Walter in Deutsch noch alles mitlesen kann.

Gruesse, Joerg

http://www.analogconsultants.com
 
Joerg wrote:

Doch heute gibt es Art of Electronics. Und der Tietze Schenk ist, glaube
ich, inzwischen sogar in portugiesisch zu bekommen.
Aber AoE und der T-S sind ein ganz anderes Niveau. Mit den Bastelkästen
habe ich angefangen, als ich etwa 10 war -- und sie kurz darauf zur
Seite gelegt und lieber am C-64 den User Port demoliert[1].

Weitergemacht habe ich mit "64'er"-Elektronikkursen ("Hardwarebasteleien
am C-64" war ein sehr gutes Buch, der Rest -- naja...) und Hobbythek-
Büchern aus der Stadtbibliothek (im Rückblick: aargh!).

AoE würde ich selbst dem begabtesten Bastler nicht vor der Oberstufe zu
lesen geben [2], den T-S eigentlich erst im Studium. Bleiben etwa sechs
Jahre, für die es an guter Literatur mangelt.

Michael


[1] Modellbahnsteuerung, erster Versuch: Märklin-Weichen direkt an den
Userport. Funktionierte ein paar Sekunden, dann war der CIA Schrott. 60
DM für einen neuen (inklusive Einbau) führen bei einem 11-Jährigem zu
einem gewaltigen Lerneffekt... :)

[2] Nicht zuletzt deshalb, weil man AoE auf Englisch lesen muß. Die
deutsche Übersetzung ist eine Strafe.
 
Holger Bruns wrote:

Heinz Richter ist Nostalgie. Rückopplungsempfänger baut heute keiner
mehr, schon gar nicht mit Röhren.
falsch,
der Kosmos "Radiomann" wurde bereits im letzten Jahr neu aufgelegt und
Audions mit Röhren werden noch zu hauf gebaut

http://www.b-kainka.de/kosmos/radiomann.htm

http://www.jogis-roehrenbude.de/Leserbriefe/Erker-Zweikreiser/zweikreis.htm

http://www.jogis-roehrenbude.de/Leserbriefe/Kraemer-Zweikreiser/Zweikreiser.
htm

http://www.jogis-roehrenbude.de/Leserbriefe/MUhlmann-Mini-Audion/Uhlmann-Min
i.htm

http://www.jogis-roehrenbude.de/Leserbriefe/Juergens-1-v-2/1V2.htm

http://www.jogis-roehrenbude.de/Leserbriefe/Johannes_Roehrenaudion/Beschreib
ung.htm

http://www.jogis-roehrenbude.de/Leserbriefe/Klaus_Radiomann-Nachbau_PCL86/Ra
diomann_PCL86.htm

http://www.jogis-roehrenbude.de/Leserbriefe/Riedel-0V2-Type5/0V2_T5.htm

http://www.jogis-roehrenbude.de/Leserbriefe/Burkhards-2SH27L-Radio/Tetroden-
Audion.htm

http://www.jogis-roehrenbude.de/Leserbriefe/Michael-Kammerer-0V2/0V2.htm

http://www.jogis-roehrenbude.de/Leserbriefe/Rauschenberg-EF80-Einkreiser/Rau
schenberger-Einkreiser.htm


Gruss
Peter
 
Joerg schrieb:

Mit dem AF116 liessen sich nicht nur Empfaenger bauen ...
Psssst, ist zwar lange her (wohl verjährt), aber mein damaliger
TV-Sender hatte durchaus 10km Reichweite.:)


Und der Tietze Schenk ist, glaube
ich, inzwischen sogar in portugiesisch zu bekommen.
Auch in Mandarin.:)


Gruß Dieter
 
Peter Voelpel schrieb in Nachricht ...
Holger Bruns wrote:

Heinz Richter ist Nostalgie. Rückopplungsempfänger baut heute keiner
mehr, schon gar nicht mit Röhren.

falsch,
der Kosmos "Radiomann" wurde bereits im letzten Jahr neu aufgelegt und
Audions mit Röhren werden noch zu hauf gebaut
Dann bitte ich vielmals um Entschuldigung. Das wußte ich nicht. Ich werde
gleich morgen bei AVM nachfragen, wieviel heutzutage ein WLAN-Audion mit
Röhren kostet und ob E-Plus so nett ist, mir zur UMTS-Flatrate ein passendes
Endgerät auf Basis der PCL 85 zu liefern.

Röhrennostalgie kannte ich bisher nur im Zusammenhang mit Verstärkern.

Holger

PS: Aber lassen wir das mal. Professionell werden Röhren in kene Empfänger
mehr eingebaut, die irgendwo vom Band laufen.
 
"Joerg" <notthisjoergsch@removethispacbell.net> wrote in message
news:1hk%e.1624$Y_5.1420@newssvr11.news.prodigy.com...
Hello Mike,


http://www.lidl.de/de/home.nsf/pages/c.o.20051004.p.Elektronik-Bausatz.ar9

Doesn't work. They want a zip code so I keyed one in that I remembered
from Germany. It's not a good web site to find anything on. Tell them to
hire someone who knows web design.

Enter 82008 or 82024 as a PLZ and search for a electronic kit.

Ah, now it worked. Nice. I think that is a good deal for 10 Euros.
Walter, what do you think?
It looks like a nice basic kit. I look now and again in the stores for such
kits, and nothing has ever come close to the Kosmos kits (I have them all!)
from the 70's. I wish Kosmos would make them again (they have revived the
Radiomann). I recently picked up a RadioShack "Electronics LearningLab"
which doesn't look too bad.


PS: JAJA deutsche NG.

Bei Euch versteht aber doch jeder Ingenieur Englisch. Ich weiss nicht,
ob Walter in Deutsch noch alles mitlesen kann.
The biggest difficulty I had with the kits was that they were in German (I
found out much later that the kits were designed for youths several years
older than I, I didn't know I wasn't supposed to understand it!). I learned
a lot of German trying to figure them out, though the difficulties were
compounded by using a German-English dictionary that did not include
engineering jargon. I still am not fluent, and need help with Google
translator now and then <g>. I write in English because I can't express
myself properly in German.

I had the chance to use this skill many years later when I found myself
hired to port some engineering software to a Japanese computer, and all the
manuals were in Japanese. I don't know any Japanese, but figured out the
manuals anyway.

I still have the Grundkasten XG. It's in remarkably good shape, though the
brass is corroded and the paper labels have yellowed and fallen off.

The effort in putting the Teil 1 online is my way of saying thanks to Kosmos
and Heinz Richter for the fine kits they made and the fun I had with them.
If they're online, they won't be forgotten. I am grateful to Kosmos for
giving me permission to do this.
 
Dieter Wiedmann schrieb in Nachricht <433DE22F.4B02C7DF@t-online.de>...

Joerg schrieb:

Mit dem AF116 liessen sich nicht nur Empfaenger bauen ...

Psssst, ist zwar lange her (wohl verjährt), aber mein damaliger
TV-Sender hatte durchaus 10km Reichweite.:)
Paßt. Mein damaliger FM-Stereosender schaffte rund 30 Kilometer mit einer
einfachen Groundplane. Ist aber schon lange her.

Holger
 
Holger Bruns wrote:

Psssst, ist zwar lange her (wohl verjährt), aber mein damaliger
TV-Sender hatte durchaus 10km Reichweite.:)

Paßt. Mein damaliger FM-Stereosender schaffte rund 30 Kilometer mit einer
einfachen Groundplane. Ist aber schon lange her.
Wie kriegt man solche Reichtweiten ohne Spezialwerkzeug zur
Antennenanpassung und Frequenzabstimmung hin? Oder hattet ihr das alles
schon als Kind?

Gruß,
Johannes
 
Johannes Bauer wrote:

Paßt. Mein damaliger FM-Stereosender schaffte rund 30 Kilometer mit
einer einfachen Groundplane. Ist aber schon lange her.

Wie kriegt man solche Reichtweiten ohne Spezialwerkzeug zur
Antennenanpassung und Frequenzabstimmung hin? Oder hattet ihr das
alles schon als Kind?
dazu benötigt man kein Spezialwerkzeug und richige Frequenzabstimmung sieht
man Empfänger

Gruss
Peter
 
Hello Walter,

The biggest difficulty I had with the kits was that they were in German (I
found out much later that the kits were designed for youths several years
older than I, I didn't know I wasn't supposed to understand it!). I learned
a lot of German trying to figure them out, though the difficulties were
compounded by using a German-English dictionary that did not include
engineering jargon. I still am not fluent, and need help with Google
translator now and then <g>. I write in English because I can't express
myself properly in German.
Did you mail order them or was your father stationed over there?

I can imagine how tough it must be to figure all this out while also
having to learn the electronics side. I had a few of those experiences
in my consulting career. An Italian client only had Italian docs. For
some reason, every time I turned to the power supply page (unita
d'alimentazione) I craved ravioli and wine. Then there was that
oscillator project where everything was Portuguese, Brazilian style. And
the folks in The Netherlands wouldn't allow me to document my design in
English. No, it absolutely had to be Dutch.

Now we live in the US but things change here as well because this is
California. The plumbing aisle at Home Depot is now also the "plomeria".

I still have the Grundkasten XG. It's in remarkably good shape, though the
brass is corroded and the paper labels have yellowed and fallen off.
I don't have my Philips anymore. Sigh. Didn't survive all the moving.
But it did not have a rigid frame like the Kosmos, more like a
collection of parts.

The effort in putting the Teil 1 online is my way of saying thanks to Kosmos
and Heinz Richter for the fine kits they made and the fun I had with them.
If they're online, they won't be forgotten. I am grateful to Kosmos for
giving me permission to do this.
No matter what people say I guess Heinz was someone who brought a lot of
youngsters into electronics.

Regards, Joerg

http://www.analogconsultants.com
 
Peter Voelpel wrote:
Johannes Bauer wrote:

Paßt. Mein damaliger FM-Stereosender schaffte rund 30 Kilometer mit
einer einfachen Groundplane. Ist aber schon lange her.

Wie kriegt man solche Reichtweiten ohne Spezialwerkzeug zur
Antennenanpassung und Frequenzabstimmung hin? Oder hattet ihr das
alles schon als Kind?

dazu benötigt man kein Spezialwerkzeug und richige Frequenzabstimmung sieht
man Empfänger
Offenbar, aber meine Frage hast du nicht beantwortet. _Wie_ kriegt man
es mit weder dem Einen noch dem Anderen hin?

Gruß,
Johannes
 
Hallo Johannes,

Wie kriegt man solche Reichtweiten ohne Spezialwerkzeug zur
Antennenanpassung und Frequenzabstimmung hin? Oder hattet ihr das
alles schon als Kind?

dazu benötigt man kein Spezialwerkzeug und richige Frequenzabstimmung sieht
man Empfänger

Offenbar, aber meine Frage hast du nicht beantwortet. _Wie_ kriegt man
es mit weder dem Einen noch dem Anderen hin?

Das ist nicht schwer. Mit einer Diode und ein paar passiven Bauteilen
plus Stueck Draht ist rasch ein Feldstaerkeanzeiger zusammengebaut.
Moeglichst grosses aber empfindliches Instrument irgendwo ausschlachten.
Weit weg aufstellen und Fernglas benutzen. Nicht geeicht natuerlich,
aber es reicht. Das erspart die Feldstaerkemessung "per pedes" mit einem
Radio. So leben die Schuhsohlen laenger ;-)

Frequenz ist sehr simpel: Ein Radio mit Diskriminatoranzeige, frueher
eben mit magischem Auge.

Die beste Anschaffung aller Zeiten war diesbezueglich bei mir das ARRL
Handbook. Damals um die $15, fast geschenkt.

Gruesse, Joerg

http://www.analogconsultants.com
 

Welcome to EDABoard.com

Sponsor

Back
Top